You searched for sealey flywheel holding tool for ford focus
Please note that words 3 characters or less may be ignored by the search.
Application: Ford focus 2005-2011, Galaxy 2006-2010, S Max 2006-2010 and Volvo Equivalent to Ford OEM 303-1183 and 303-1180 and Volvo 999 5765 Includes camshaft holding tool and crankshaft front oil seal installer
Covers most engines in the Ford range (pre 2007) including both petrol and diesel and the Zetec engine. Additional Information This tool is required on engines where the flywheel and crankshaft must be held at the correct timing position.
This flywheel locking tool is now available with 2 extra adaptors allowing use on a larger model group in the Ford range in both petrol and diesel engines. Flywheel locking tool – OEM 303-393. Adaptors – OEM 303-393-01/-02
This tool is specific to those Ford DuraTorq engines fitted with common rail fuel injection. OEM No 303-698 (21-251)
This new camshaft setting bar updates the existing 3096 and is suitable for all the applications Also included in the kit is 303-748 (21-259) for Focus/C-Max 1.6, 1.4/1.6 and Fiesta/Fusion 1.2/1.4/1.6 Also used on Volvo models with 1.8/2.0 CHAIN engines
Rear suspension tool for trailing arm bushes. Ford Focus Mk 1 & II (98-07)(07<) | Kuga 2008< | C-Max MPV 2007 | Mazda 3 (Chassis BK) 2003<09 Saloon and Hatchback, 5 (Chassis CR, CW) MPV | 2005 Volvo V50 Estate 2004<2012, S40 Mk II Saloon 2003<2012.
For holding the viscous coupling whilst working on the front of the engine - Ford Transit 2.3 petrol and 2.4/4.3 TDCi. working on the front of the engine. Applications: Transit 2000-2006 | Transit 2006 onwards | 2.3 Duratec petrol and 2.4 | 3.2 Duratorq TDCi.
Kit covers timing belt replacement and timing adjustment on Ford 1.6Ti-VCT petrol engines. Includes VCT setting plate, flywheel locking tool, camshaft and tensioner pins. Also includes camshaft setting plate for timing adjustment applications.
Counter holds the crankshaft pulley while the pulley retaining bolt is loosened/tightened. Also suitable for some Volvo vehicles.
A specialist locking and holding tool kit for the balance shafts fitted to the engines listed. Some engines require the removal and or checking of the balance shaft assembly for which these tools are required.
For use on the popular 1.3 JTD diesel engine found in the Citroen, Peugeot, Fiat, Ford and Alfa Romeo ranges.
Hand held crankshaft holding tool with a specially designed head profile which permits access via a deep socket (not supplied) to each of the pulley bolts in turn OEM Ref 303-1310
cambelt timing tool set for Ford 1.0 GTDI Additional Information Applications: Ford 1.0lt 3cyl Turbo charged EcoBoost engine from 2012< GTDi engines found in Ford B-Max, C-Max, Fiesta, Focus, Grand C-Max, Transit
Includes a camshaft holding tool which is essential for holding the camshaft when checking the valve clearances, and a crankshaft front oil seal installe
Crankshaft pulley holding tool adapter 2 - OEM 2.000.018.400 303-1177 Crankshaft pulley hub holding tool 4 - OEM 2.000.001.000 Crankshaft pulley hub holding tool 3 - OEM 2.000.025.500 Crankshaft pulley holding tool 1 - OEM 1.871.000.2
NEW ENGINE TIMING KIT (FIAT, ALFA ROMEO, CITROEN, FORD, LANCIA, PEUGEOT, SUBARU, SUZUKI, VAUXHALL) (CC)
Timing chain tensioning tool - OEM 1 870 900 400 Crankshaft pulley holding tool - OEM 1 871 000 200 Crankshaft locking pin - OEM N/A 8mm Pin Crankshaft alignment tool - OEM 1 870 900 300 Camshaft alignment tool x 2 - OEM 1 871 000 900 Crankshaft pin - OEM EN-46785
RH drive rewind tool. Adaptor 1 = 22mm PCD, 6mm diameter pin. Adaptor 2 = 32.5mm PCD, 6mm diameter pins Reaction plate included. Adaptor No 1: Most popular Japanese and European vehicles. Adaptor No 2: Most Ford, Mazda, Mitsubishi, Toyota.
Includes 6mm setting pin and washer. 6mm setting pin, 8mm setting screw, 9.5mm setting. Also includes TDC setting screw and setting bracket. Essential tool for setting and locking the camshaft. Suitable for Ford 1.6, 1.8 and 2.5 litre diesel engines.
Part of the Laser range of engine timing tool kits and put together to provide the minimum tool requirement for setting the timing on the Fiat derived 1.3 JTD/HDi diesel engines that are found in the Fiat, Opel, Citroen, Peugeot, Ford, Suzuki Chrysler and Chevrolet ranges
Essential tools for setting and locking camshafts and crankshafts. For engines with single and double (twin) overhead camshafts. Covers Audi, Citroën, Ford, Honda, Land Rover, Mazda, MG, Peugeot, Rover and Vauxhall/Opel. OEM reference and application list included. Good starting kit for some of
This timing tool kit covers most engines in the Ford range (pre 2007) including both petrol and diesel and the Zetec engine. Supplied in foam tray with full OEM codes and application list included.
For cam replacements and head rebuilds on Volvo and Ford 2.5 ST engines. Contains all the tools to make cylinder head rebuild easier and faster Equivalent to Volvo OEM 999 5454, 999 5452, 999 5453, 999 5451 and Ford OEM 303-1178, 303-1182 Fitted to Volvo 850, S70, V70, XC70, V70. 960, S90, S60,
onal Information This radio removal tool kit is designed to help authorised audio specialists remove in-car sound systems. Suitable for: Audi | BMW | Ford | Mercedes-Benz | Volkswagen. Handy storage wallet. Time Saver.
Timing tool Kit for Ford Duratorq engines including timing pump removal and installation tools for 2.0/2.4 TDCi.
A practical kit allowing the locking of the camshaft and crankshaft for replacement of the timing belt on the Ford range of 1.8 TDDi, TDCi and turbo diesel engines. Used on the Ford diesel engine where the diesel pump is driven by a separate chain drive.
Originally introduced for use on diesel injector clamp bolts the 4276 applications are constantly growing. The 4276 applications now include brake caliper mounting bolts for the Mercedes ML and Ford Focus and Edge from 2016 onwards
Timing Tool Set for VAG 2.0Litre TDi PD DOHC engines fitted to Audi A3/A4/A5/A6, Skoda Octavia II and Volkswagen Golf, Golf Plus, Jetta and Touran models. Also found on the Ford Galaxy
The Laser cam-belt tool range has been developed to provide the essential tools required to set and time the main engine components when replacing the camshaft belt drives.
A pair of locking pins designed specifically for the later Ford TDCi engine ranges
Includes: Flange Holding Wrench | 3 bolts 1/2"D OEM Ref: 1 871 000 200 303-1469 | KM 661-C. Timing Chain Tensioner lever + 2 bolts 1 870 900 400. Camshaft Locking Tool (2) 1 871 000 900 | 1 860 985 000, 303-1472 09917 68610, EN 46781, 0104-A Flywheel Alignment Pin & Spring 09912 38300, E
The most up to date and comprehensive timing tool kit for the latest Ford diesel and petrol engines
see la3203 draper out of stock
Diesel Engine Auxiliary Belt Tension Tool - Ford 2.0D, 2.2D Di/TDdi/TDCi & 2.4D TDdi - Chain Drive (AH)
Petrol engine timing tool set specifically designed for Fiat 1.2 & 1.4 8v engines in Fiat 500 | Idea | Linea | Punto | Doblo | Panda. Also Ford KA. Full application list and instructions supplied. Foam insert ensures the tools are replaced after timing belt replacement.
Specific kit supplied for Ford | Land Rover | PSA and Volvo 2.0 | 2.2 DOHC common rail diesel engines.
Auxiliary belt tensioner tool for Ford Durotorq engines 2.0 | 2.2 TDDI | TDCI fitted to Mondeo. ensioning tool or use on Ford Mondeo 2.0 | 2.3 TDDI | TDCI engines. Engine Codes: D5BA | D6BA | HJBA | B | HJBC | FMBA | B | N7BA | QJBB | QJBA