You searched for opel+subframe+alignment+tool
Please note that words 3 characters or less may be ignored by the search.
Camshaft alignment pin (KM 6340) and tensioner locking pin (KM 6333) for Vauxhall/Opel Astra-G, Astra-H, Meriva (VXR), Zafira-B 1.6 16v with engines Z16LET, Z16XEP 2003-2007
Comprehensive engine timing tool set for Italian cars. Includes 24 tools for camshaft alignment, tensioning and crankshaft alignment to cover a wide range of petrol and diesel engines packed in a metal case.
Aids the removal and replacement of cam followers on 8 valve engine ble for Vauxhall/Opel. Requires 8 tools to complete the job. • Time saver. Essential tool for camshaft removal
This camshaft locking tool is specifically designed for use on Vauxhall | Opel | Saab 1.4/1.6 16v Ecotec belt driven engines
Part of the Laser range of engine timing tool kits and put together to provide the minimum tool requirement for setting the timing on the Fiat derived 1.3 JTD/HDi diesel engines that are found in the Fiat, Opel, Citroen, Peugeot, Ford, Suzuki Chrysler and Chevrolet ranges
Camshaft locking tool for Vauxhall/Opel V6 engines
A set of timing tools for the V6 belt driven engine on 2.5/2.6/3.0 engines with raised edge on the tensioner pulley. Fitted to Vauxhall/Opel Vectra-B, Omega-B, Sintra, Calibra with engine codes X25XE, X30XE, Y26SE, Y32SE. Saab 9-5 3.0 V6 with engine code B308E (1998-2003)
Part of the Laser range of Engine Timing Tools - VAG
Essential tools for setting and locking camshafts and crankshafts. For engines with single and double (twin) overhead camshafts. Covers Audi, Citroën, Ford, Honda, Land Rover, Mazda, MG, Peugeot, Rover and Vauxhall/Opel. OEM reference and application list included. Good starting kit for some of
Specifically designed to allow the correct alignment on the engine pulleys when replacing the cambelts on the 1.6 16v petrol engine. For 1.6 16v engines.
post in 1 hour This set of tools enables the correct timing to be made when servicing the Vauxhall/Opel chain engines fitted to Vauxhall Agila and Corsa with 1.0 12v X10XE and 1.2 16v X12XE engines.
Vauxhall/Opel Ecotec 2.0 engines fitted to Vectra-B, Sintra, Zafira, Frontera-B models. Also suitable for use on Saab 9-3/9-5 with 2.2D Turbo. OEM Code No: Saab 83 95 394/337/352/386. Metal case available - Part No 4536
For use on Mercedes-Benz chain engines which codes start with 112 or 113 Includes right and left handed camshaft locking tools
Vauxhall/Opel Renault Clio 1.5 (K9K) 1.9 (F9Q) and 2.3/2.5 Dci G9 engines used in Laguna II, Espace, Trafic and Master plus 2.2 Dti (2000-05) engine codes G9T 720 in Vauxhall Movano 2.2 Tdi Also
Application: Vauxhall/Opel/Saab/Cadillac/Holden 2.8i, 3.6i V6 engines
Typical Price: £1149.30 exc VAT £1379.16 inc VAT This kit has the required components for the Porsche Flat 6 engines
Includes: Flange Holding Wrench | 3 bolts 1/2"D OEM Ref: 1 871 000 200 303-1469 | KM 661-C. Timing Chain Tensioner lever + 2 bolts 1 870 900 400. Camshaft Locking Tool (2) 1 871 000 900 | 1 860 985 000, 303-1472 09917 68610, EN 46781, 0104-A Flywheel Alignment Pin & Spring 09912 38300, E
Camshaft alignment tool for 2.5 DOHC ( non turbo) engines. Manufactured from aluminium to original Subaru reference 499207300.
A set of four sub-frame alignment guide set with M14 thread specifically designed for Volkswagen Transporter T5
The General Motors master kit has been compiled to offer the timing tools required for both petrol and diesel engines found in the GM range. Includes coverage of the latest Eco-tec engines (Z16/Z18 codes)
Timing tool kit for Renault 1.6, 2.0, 2.3 DCI chain drive diesel engines fitted to the Megane | Vel Satis | Espace | Scenic | Trafic | Laguna | Koleos, also fitted to the Nissan Qashqai and the Vauxhall | Opel Vivaro.
Check and adjust the Camshaft timing, remove and replace the Cam belt and perform complete cylinder head rebuilds whilst maintaining the correct valve timing on 1.6 | 1.9 | 2.4 JTD Multijet Diesel engines on Fiat, Alfa Romeo, Vauxhall/Opel and Saab SOHC | DOHC.
Developed for the late Vauxhall/Opel | Chevrolet 2.0 common rail diesel engine this kit holds the correct position of the camshafts and crankshaft whilst changing the timing belt on SOHC 16v engines.
Engine Timing Tool Kit - Vauxhall/Opel
Diesel pump pulley locking tool Vauxhall/Opel/Renault /Nissan
Designed to lock the balance shafts in the correct timed position during engine rebuild. Covers N47, B47 and B48 engines
This Water Pump Holding Tool is suitable for removing and fitting a water pump without disturbing the timing chain. Simply remove the front cover and install the tool holding the timing chain in place. Suitable for Vauxhall/Opel 2.2 16v Z22SE | Opel Vectra | Astra | Zafira | Signum |
Part of the Laser Cam-Belt Tool Kit Range which has been developed to provide the essential tools required to set and time the main engine components when replacing the Camshaft Drive Belts
Alignment tool for JLR Auto gearbox selector Applications include Land Rover V8 Defender, Land Rover Discovery 1 and
The Oil Pump Alignment Tool has been developed to correctly align the engine oil pump in the sump after an engine rebuild etc.
Part of the Laser Tools crankshaft alignment range Additional Information For use on Duratorq engines Applications Ford Transit, Ranger with 2.0/2.2/2.4/3.2 TDCi/TDDi engines plus Jaguar X Type X400 and Land Rover Defender This kit is required when you replace the crank seal and when you remov
Crankshaft holding and removal tool for Vauxhall/Opel 1.0LT & 1.4LT engines
This engine timing kit offers the tools required to set, adjust and check the engine timing on the latest 1.3 CDTi Diesel engines from Vauxhall/Opel
Typical Price: Part of the Laser range of timing tools for Vauxhall/Opel engines
Part of the Laser range of Engine Timing Tool range for Vauxhall/Opel
2.0CDTI timing belt tool kit for Opel/Vauxhall for removal and replacement of the camshaft drive belt. . The kit also contains the tool required lock the flywheel on vehicles fitted with automatic transmission.
Part of the Laser range of Engine Timing Tools for Vauxhall/Opel
A comprehensive locking kit for the Vauxhall/Opel 1.6 SIDI petrol engine. The kit provides the essential tools required for camshaft drive chain replacementand setting the engine timing
The essential camshaft and crankshaft alignment tools for the popular 1.25, 1.4, 1.6 Ford, petrol, engines. This kit includes the alignment tool for VVT system found on many of these engines which extends the kits coverage from 1996 to 2010. Also relevant to the Mazda and Volvo ranges
Modern engines that use gear drives to drive their camshafts, balance shaft etc. often have a sprung loaded split gear in the gear train. These split gears are used to reduce gear chatter and noise. However, when it comes to service and repair
A kit specifically designed to set the balance shafts on the BMW engines when the balance shafts have been disturbed. Application: BMW engines: N40, N42, N43, N45, N46, N46T, N49, N52 11 8 700 Balance shaft alignment fork type
Crankskaft pulley holding tool for Vauxhall/Opel and some Chevrolet models Designed to hold the crankshaft pulley of the vehicles whilst removing the crankshafts fixing bolts
Camshaft locking tool - OEM T10414 DTI gauge - OEM VAS6079 TDC indicator - OEM T10170 Camshaft alignment tool - OEM T10171 Tensioner locking pin - OEM T20046/T40011 Crankshaft locking pin - OEM T10340 Guides - OEM T10341
Crankshaft alignment tool - OEM 1.860.905.000, OEM 1.860.905.010, OEM 2.000.003.000, EN-46788 32 025 009 Flywheel locking tool - OEM 1.860.898.000, Fuel pump alignment pin - OEM 1.860.965.000 Camshaft alignment pins x 2 - OEM 1.870.896.900, EN-46789 32 025 008
NEW ENGINE TIMING KIT (FIAT, ALFA ROMEO, CITROEN, FORD, LANCIA, PEUGEOT, SUBARU, SUZUKI, VAUXHALL) (CC)
Timing chain tensioning tool - OEM 1 870 900 400 Crankshaft pulley holding tool - OEM 1 871 000 200 Crankshaft locking pin - OEM N/A 8mm Pin Crankshaft alignment tool - OEM 1 870 900 300 Camshaft alignment tool x 2 - OEM 1 871 000 900 Crankshaft pin - OEM EN-46785
Camshaft alignment tool - OEM T10504 Stepped pin long - OEM T10504/1 Stepped pin short - OEM T10340 Crankshaft timing pin - OEM T10504/2
Crankshaft turning tool - OEM T40049 Camshaft alignment pin - OEM T40060 Camshaft alignment tool - OEM T40061 Tension tool - OEM T40062 Pulley bolt - OEM T40058 Timing chain tensioner locking pins - OEM T40071 Injection pump timing pin - OEM 3359 Chain tension pins - OEM N/A Crankshaft locki