Volkswagen

NEW ENGINE TIMING KIT (AUDI, SEAT, SKODA, VOLKSWAGEN) (CC)

DR19141

Contents: Camshaft locking tool - OEM T10016/T10074

NEW ENGINE TIMING KIT (AUDI, PORSCHE, VOLKSWAGEN) (CC)

DR15328

Crankshaft turning tool - OEM T40049 Camshaft alignment pin - OEM T40060 Camshaft alignment tool - OEM T40061 Tension tool - OEM T40062 Pulley bolt - OEM T40058 Timing chain tensioner locking pins - OEM T40071 Injection pump timing pin - OEM 3359 Chain tension pins - OEM N/A Crankshaft locki

NEW ENGINE TIMING KIT (SEAT, SKODA, VOLKSWAGEN) (CC)

dr19106

Contents: Camshaft locking plate - OEM T10477 Crankshaft locking pin - OEM T10340 Camshaft sprocket locking tool - OEM T10476

W ENGINE TIMING KIT (AUDI, SEAT, SKODA VOLKSWAGEN) (CC)

dr19198

Camshaft alignment tool - OEM T10504 Stepped pin long - OEM T10504/1 Stepped pin short - OEM T10340 Crankshaft timing pin - OEM T10504/2

NEW VIBRATION DAMPER HOLDING TOOL (AUDI, SEAT, SKODA, VOLKSWAGEN) (CC)

DR19197

Vibration damper holding tool - OEM T10531/1 Crankshaft sprocket holding tool - OEM T10531/2 Crankshaft sprocket holding tool adapter - OEM T10531/3 Crankshaft sprocket holding tool nut - OEM T10531/4

Engine Timing Tool Kit - VAG 1.0-1.2-1.4 (AHC)

la6586

Part of the Laser range of Engine Timing Tools for VAG

Engine Timing Tool Set - VAG 1.4/1.6/2.0i TDi CR (AHC)

la6809

A comprehensive kit for the removal and fitting of the cambelt on popular 1.4, 1.6 and 2.0 VAG diesel engines fitted across the range. Also includes 2 pins for the gears in the cylinder head.

Tension Lever - VAG 1.8/2.0 TFSI (AHC)

LA6053

Timing chain tension lever used in conjunction with Laser Tools 5981 Engine codes CDAA/CDHA/CDHB/CJEB/CDAB/CGYA on

Crankshaft Pulley Holding Tool - VAG (AHC)

la6998

Designed to be used to hold the crankshaft pulley stationary whilst loosening or tightening the crankshaft pulley fixing bolts. Designed with an angled shaft to assist access on transverse mounted engines

Crankshaft Holding Wrench - VAG (AHc)

LA6658

Designed to hold the crankshaft pulley while loosening or tightening the crankshaft centre bolt

Camshaft Locking Tool - Volkswagen (AHC)

la7087

The 7087 Camshaft Locking Tool is designed to lock the camshaft of the 2.8lt Diesel engines used in the popular Volkswagen LT van.

Engine Timing Tool Kit VAG/Porsche 6&8 cyl FSi (AHC)

la6683

For replacing timing chains on VAG and Porsche petrol engines 2.8, 3.2, 3.6, 4.0, 6.0 and 6.3Litre with 6 & 8 cylinder Applications: Volkswagen Phaeton, Touareg, Passat, Passat CC, Bora, Eos, Golf Mk IV, Golf Mk IV Estate, Golf Mk V, Sharan, Transporter T4, Transporter

Engine Timing Tool Kit - VAG 1.2-1.4 TSI (ahc)

LA6348

Part of the Laser Tools range of Engine Timing Tool kits for VAG Additional Information Application for late 1.2/1.4TSI four cylinder, petrol engines (for three cylinder engines please use Laser 6230) Fitted to Audi A1,

Steering Knuckle Pinch-bolt Drift - VAG 3pc (AHC)

la5863

Our ProductsCarsSteering and SuspensionVauxhall/VAG Ball Joints Steering Knuckle Pinch-bolt Drift - VAG 3pc

Piston Insertion Tool - VAG (AHA)

la6696

Application: Audi TT Quattro Coupe and Volkswagen Golf 2008< Engine: VR6 3.2 litre, Code CBRA with standard pistons Equivalent to OEM T10147 Before first use of a new 6696 pass a well oiled piston and ring assemble

Bosch Injector Dismantling Tool (AHA)

la4761

Suitable for removing the internal part of Bosch Injectors.

Bosch Injector Dismantling Tool (AHA)

la4761

Suitable for removing the internal part of Bosch Injectors.

Timing Kit - Volkswagen Crafter 2.5 TDI ENGINES (AHC)

la4839

Volkswagen Crafter 2.5 Tdi. Designed for engine codes: BJJ | BJK | BJL | BJM(06-09). Essential service tool.

Volkswagen Assorted Trim Clips 255pcs (AHA)

lc36030

Assorted Box Trim Clips for Volkswagen Box Qty 255 pces.

Assorted Box of Panel Clips to VAG Group 110 Pc (AHA)

lc36049

Panel Clip Retainers. 6 popular clips. Suits VAG Group. Covers VW, Audi, Seat, Skoda. Box contains 110 pieces.

Spring Support Remover - Showa BPF 41mm (AHACC)

la6791

Spring support remover for Showa BPF 41mm

Clamp for Strut Insert Pistons - 60mm Bolts (AHA)

la6270

Clamp for Strut insert pistons with 60mm bolts

Engine Timing Tool Kit - Audi RS3, Q3, TT 2 .5 (AHA)

la6715

Engine Timing tool kit for Audi 2.5 chain driven petrol engines fitted to RS Q3/RS3/TT

Ball End Hex Bit 5mm x 288mm (AHA)

la6710

Extra long ball end Hex bit in 1/2"D. 5mm x 288mm long. Suitable for sump bolts on Volkswagen T4

Top Suspension Mount Tool - Volkswagen (AHA)

la6799

specially designed tool for use when removing/replacing the top Macpherson strut suspension mount found on vehicles across the VAG range.

Camshaft Alignment Kit VAG 1.4TFSi (AHC)

la6554

Part of the Laser range of Engine Timing Tools - VAG

Cam-Belt Tool Kit VAG Petrol FSi 1.4/1.6 (AHC)

la6559

A small but essential kit for setting the camshafts and tensioner on the popular 1.4 and 1.6 FSi petrol engines found across the VAG ranges from 1999 to 2008 these engines Use one belt to transfer the drive across the camshafts depending on the engine specification the cam setting pins may be use

6242 Sump Plug Removal Tool - VAG 2lt 4Cyl (G)

la6242

Description .......: FORD/VAG TIMING KIT (cc)

DR32745

VAG Engine Codes: AJM, AMF, ANU, ANY, ARL, ASZ, ATD, AUY, AXR, AYZ, AGD, AHG, AKU, ASX, AEY, AFN, AHB, AHU, AKW, ALE, AEF, 1Y Ford Engine Codes: AFN, ANU, AUY, ASZ,

.......: VAG TENSION KIT (AHA)

DR32736

VAG

3932 Termina tool /audi /v-wagen [ah]

la3932

4945 Oil Service Wrench - M16 Spline x 19mm [ahcc]

la4945

A two in one wrench for oil service on many popular makes including Audi A4 | A6 | Volkswagen Golf IV | T4 | T5 | Passat | Porsche Boxster & BMW. Double ended with 19mm single hex and M16 Spline (tamperproof).

5742 Engine Timing Tool Kit - VAG TFSI/FSI Engine Timing ToolsSkoda Timing Tools Engine Timing Tool Kit - VAG TFSI/FSI [ahcc]

la5742

Upgraded engine locking timing tool kit for the TFSi/FSi VAG engine. Applications available to download Applications: 1.4/1.6FSi Also 1.4 TSi and 1.2TFSi/FSi engines Upgraded version of existing kit 5021 OEM Cross reference and instructions provided

LARGE KIT Engine Timing Tool - VAG 2.5D (AHC)

la5204

Applications: Volkswagen Touareg and Transporter. Engine codes AXE | AXD | BAC | BLK | BLJ | BNZ | BPC | BPE | BPD. Supplied in metal storage case. 2.5 Tdi PD

4597 Diesel Injector Seat (AHc)

la4597

Used for re-cutting injector seats when reconditioning the diesel injectors. Set of 4 cutters: 17mm flat cutter with 19mm external diameter for Mercedes-Benz CRD. 15mm flat cutter with 19mm external diameter for other makes. 17mm angles cutter with 21mm external diameter for Fiat | Iveco. 17mm f

Impact Diesel Injector Remover VAG (ah)c)

la4640

This specialist kit is designed primarily for removing tight diesel injectors from Volkswagen engines. Due to the build up of carbon the injectors can become seized and difficult to remove. The first step is to use an open ended spanner on the flat part of the injector body to turn and using gentle

3 Pin Piston Wind Back Adaptor - VAG (G)

LA5538

Camshaft Adjustment Tool - VAG ( ahc)

LA5723

F Camshaft adjustment tool - double sized.

Hub Nut Socket VW Crafter 3/4"D LASER 5047

LA5047

Engine Timing Kit VAG 1.6/2.0 TDI (AHC)

LA5130

A nine piece engine locking tool kit for the 5th generation VAG "blue motion" engine fitted with a common rail diesel system. Set includes Crankshaft Pulley Locking Tools for round (T10050)sprockets at 12oClock position and oval sprockets (T10100) at 1oClock position

Diesel Engine Camshaft Setting Plate - VAG 1.9SDi/Tdi - Belt Drive

SEVSE5850

Front Suspension Bush Tool - VAG [e]

SEVSE4781

Service Position Front End Support Guide Set - VAG (AH)

SEVSE5852

Diesel Engine Setting/Locking Kit - VAG 2.5 TDi - Belt Drive

SEVS4999

Petrol Engine Setting/Locking Kit - VAG 1.2 3Cyl (6v/12v) - Chain Drive

SEVSE5921

Diesel Engine Setting/Locking Kit - VAG 2.4/2.5 TDi - Belt Drive

SEVS4448

Diesel/Petrol Camshaft Sprocket Remover - VAG - Belt Drive

SEVSE5959

Diesel Engine Timing Tool Kit - VAG - Belt Drive (G)

SEVSE2358

Spark Plug Puller Set 4pc - VAG (AHA)

SEVS5294

Suitable for installation/removal of ignition coils and separating the HT leads from deep-seated spark plugs on VAG vehicles. Long shafts with composite T-style handle for added control and stability. Prevents damage to ignition coils whilst allowing faster removal

Petrol Engine Tensioner Locking Pins - VAG - Belt Drive

ADDRESS

LINKS