Developed to remove and refit the rear outer suspension joint fitted to the camber control arm and the track control arm bush found on the BMW 1 & 3 series models.
Typical Price: Part of the Laser range of timing tools for Vauxhall/Opel engines
EN DE FR Typical Price: £195.70 exc VAT £234.84 inc VAT Diesel timing kit-1.6R9M Renault/Nissan/Mercedes-Benz/Vauxhall Additional Information Designed for 1.6 R9M Renault engine in Renault, Nissan/Mercedes-Benz/Vauxhall
For use on the popular 1.3 JTD diesel engine found in the Citroen, Peugeot, Fiat, Ford and Alfa Romeo ranges.
Application: Vauxhall/Opel/Saab/Cadillac/Holden 2.8i, 3.6i V6 engines
Engine Timing Tool Kit - Vauxhall/Opel
FR Typical Price: £93.40 exc VAT £112.08 inc VAT Engine timing kit for GM derived belt driven engine 16v 1.6 and 1.8 Z and A engine codes found in Vauxhalls, Chevrolet's, Fiats and Alfa Romeo's.2003 - 2012. Additiona
Developed for the late Vauxhall/Opel | Chevrolet 2.0 common rail diesel engine this kit holds the correct position of the camshafts and crankshaft whilst changing the timing belt on SOHC 16v engines.
Engine timing locking tool kit for Chrysler 2.5 Common Rail Diesel engines fitted to Chrysler Voyager | Grand Voyager and LDV Maxus.
Petrol Engine Setting/Locking Kit - Alfa Romeo, Chevrolet, Fiat, Saab, Vauxhall/Opel - 1.4, 1.6, 1.8 16v - Belt Drive(AHA)
A special diesel injection pump puller for BMW | Land Rover | Vauxhall/Opel vehicles with 2.5 TDS engines.
Model No. VSE5877
Diesel Engine Timing/Pump Removal Kit - BMW, Land Rover, Vauxhall/Opel - 1.7D, 2.5D Turbo - M41, M51 - Chain Drive
Diesel Engine Locking Kit - Renault/Nissan dCi Vauxhall/Opel 1.5, 1.9, 2.2, 2.5 Di/DTi/CDTi - Belt Drive (AHA)
Timing tool kit for Renault 1.6, 2.0, 2.3 DCI chain drive diesel engines fitted to the Megane | Vel Satis | Espace | Scenic | Trafic | Laguna | Koleos, also fitted to the Nissan Qashqai and the Vauxhall | Opel Vivaro.
The General Motors master kit has been compiled to offer the timing tools required for both petrol and diesel engines found in the GM range. Includes coverage of the latest Eco-tec engines (Z16/Z18 codes)
Camshaft alignment pin (KM 6340) and tensioner locking pin (KM 6333) for Vauxhall/Opel Astra-G, Astra-H, Meriva (VXR), Zafira-B 1.6 16v with engines Z16LET, Z16XEP 2003-2007
Vauxhall/Opel Renault Clio 1.5 (K9K) 1.9 (F9Q) and 2.3/2.5 Dci G9 engines used in Laguna II, Espace, Trafic and Master plus 2.2 Dti (2000-05) engine codes G9T 720 in Vauxhall Movano 2.2 Tdi Also
This set of timing tools enables the correct timing position to be held when servicing GM Ecotec 2.2/2.5 litre engines. Also for use on some Renault engines. For Interstar 2.2 and 2.5 dCi. Engine codes: G9U, G9T (2002-2010).
For Corsa-C | Astra-G | Vectra | Zafira 1.4 | 1.6 16v engines OEM No. KM 652 Included in master kits 4866 and 3785
A very simple tool used to lock the flywheel via the ring gear to allow the front pulley to be undone without putting unwanted loads on the camshaft locking tools
post in 1 hour This set of tools enables the correct timing to be made when servicing the Vauxhall/Opel chain engines fitted to Vauxhall Agila and Corsa with 1.0 12v X10XE and 1.2 16v X12XE engines.
Timing tool set for Renault 16v engines. Includes camshaft setting tool, tensioning tool for auxiliary drive belt and crankshaft TDC timing pin for: Laguna | Safrane 2.0 | 2.5 16v 1996-2001 engines.
A set of timing tools for the V6 belt driven engine on 2.5/2.6/3.0 engines with raised edge on the tensioner pulley. Fitted to Vauxhall/Opel Vectra-B, Omega-B, Sintra, Calibra with engine codes X25XE, X30XE, Y26SE, Y32SE. Saab 9-5 3.0 V6 with engine code B308E (1998-2003)
OEM code KM 800-2 For the left handed camshaft Green Right handed camshaft - Part No. 3132 (red) Part of kit 3302
Camshaft locking tool for Vauxhall/Opel V6 engines
This tool is used during the installation of a new timing belt on models equipped with a manual tensioner.
This camshaft locking tool is specifically designed for use on Vauxhall | Opel | Saab 1.4/1.6 16v Ecotec belt driven engines
To remove or replace drive shaft lock rings for CV joint servicing. This tool also spreads the ears of the wheel cylinder retaining clips on some vehicles
This timing tool set is suitable for engines manufactured after 1997 where the threaded location holes have been removed.
Aids the removal and replacement of cam followers on 8 valve engine ble for Vauxhall/Opel. Requires 8 tools to complete the job. • Time saver. Essential tool for camshaft removal