You searched for tools
Please note that words 3 characters or less may be ignored by the search.
To keep air tools lubricated. 1/4" BSP thread. Can be used with most of the air tools shown in this Catalogue. Display packed.
A quality leather sports bag with the Laser Tools Racing logo. Strong comfortable brown handles
Part of the Laser Tools range of Timing Tools for Ford engines
Part of the large range of Bush tools from Laser Tools •Rear lower control arm bush remover/installer •Applications BMW E87/E90/E93/M3 •Trailing arm Bush No 26643 •Supplied in a blow mould case with instructions and application list •Always grease the threaded bar before use - Bar is consumable
Laser Tools | 5137 | Hex Bit Set 7mm - 2pc Laser Tools | 5137 | He
post in 1 hour
Part of the Hybrid range of hand tools
Part of the Laser Tools workshop range
Part of the Hybrid range of hand tools
Part of Laser's range of tools for the Hybrid vehicle ranges
Part of the Laser Tools Motorcycle range
TOOL BOX KIT(Draper Tools reseves the right to substitute items in this kit of equivalent finish or quality if the original item has been discontinued or is out of stock)
For use on Mercedes-Benz chain engines which codes start with 112 or 113 Includes right and left handed camshaft locking tools
Part of the Laser range of Motorcycle tools
This set enables the correct timing to be made when servicing the BMW M47 2.0 16 engines
10 point.....17pt....and 21 point spline bit set
This tool kit is a complete kit that allows the valve timing to be set/maintained during cam belt replacement
Part of the Laser range of specialist tools for Fuel Filters
5 cantilever trays. 420mm x 200mm x 210mm. Ideal storage solution for all types of tools. Sturdy metal. Red painted finish
Flip socket head. 6mm x 7mm. Flexible shaft for easy access. Two tools in one. Spare heads available - Part No 2932.
Suitable for setting and adjusting the timing on N42 and N46 engines with the Valvetronic system. Also includes tools to align the twin Vanos unit.
A set of low profile, offset tools in Star, Hex, Flat and PzDrive profiles. Ideal for restricted access
Part of the Laser Tools Torque Wrench range
Part of the Laser range of tools for Steering and Suspension After separating the ball joint from the steering knuckle slip the tool over the track rod and remov
Part of the Laser range of tools for Oil Sump Repair
Engine locking tools with specifically machined profiles for locking the camshaft in the exact timing position.
The General Motors master kit has been compiled to offer the timing tools required for both petrol and diesel engines found in the GM range. Includes coverage of the latest Eco-tec engines (Z16/Z18 codes)
Invaluable when installing exhaust systems. Two T-handled tools allow easy fitting of exhaust mounts. 90° and 120° hooks to suit block and ring mounts respectively.
A very simple tool used to lock the flywheel via the ring gear to allow the front pulley to be undone without putting unwanted loads on the camshaft locking tools
Part of the Laser Tools Trim Clip removal range
Tools for Timing Chains on Mercedes Benz engines
Aids the removal and replacement of cam followers on 8 valve engine ble for Vauxhall/Opel. Requires 8 tools to complete the job. • Time saver. Essential tool for camshaft removal
For use on Vauxhall Vectra B models (>2002). Always lubricate nut and bar before and after use. Two bars are included with this set. Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing (Laser Tools Recommends Molybdenum Disulphide Grease (black
Weatherproof single outdoor 230V socket with RCD adaptor and cable Ideal for powering of pressure washers, power tools, garden lights, pond pumps etc Comprises: 13A socket, RCD and 3M of cable with stripped ends ›
Timing tool Kit for Ford Duratorq engines including timing pump removal and installation tools for 2.0/2.4 TDCi.
The latest addition to Laser Toolsâ€™ ever growing range of motorcycle tools and equipment is this easy to use fork tube puller (part no: 5469), designed for classic Triumph, BSA and Norton models
This robust Slide Hammer with 5/8" UNF thread and 10lb of force can be used with a variety of tools and for many applications including the removal of stubborn diesel injectors etc. Useful with Laser's Diesel Injector Set (Part No 4760).
Camshaft locking tools for Lancia Kappa 2.0 | 2.4 20v.
A set of timing tools for the V6 belt driven engine on 2.5/2.6/3.0 engines with raised edge on the tensioner pulley. Fitted to Vauxhall/Opel Vectra-B, Omega-B, Sintra, Calibra with engine codes X25XE, X30XE, Y26SE, Y32SE. Saab 9-5 3.0 V6 with engine code B308E (1998-2003)
A range of timing tools for the latest EW coded PSA engine used on Citroën Xsara | Picasso | C5 | C4 | Evasion | Synergie | C8 | Jumpy | Dispatch and Peugeot 206 | 307 | 406 | Coupe 607 | 806 | 807 | Expert Engine Codes EW12J4(3FC) | EW10D-HPI(RLZ) | EW10J4S(RFK) | EW10J4(RFN/RFR) | EW7J4(6FZ).
Comprehensive range of alternator tools. Complete with blow mould case for storage. Set includes M10 Spline x 1/2"D, T50 Star x 1/2"D for Bosch alternators. Also Hex: 10mm | 8mm, Spline: M8 | M10 and Star: T40 | T50. Also included 1/2"D to Hex adaptor, 2 x pu