You searched for tool+sup
Please note that words 3 characters or less may be ignored by the search.
Supplied in tool roll. Sizes: 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 30 | 32mm.
This timing tool kit covers most engines in the Ford range (pre 2007) including both petrol and diesel and the Zetec engine. Supplied in foam tray with full OEM codes and application list included.
Applications: Volkswagen Touareg and Transporter. Engine codes AXE | AXD | BAC | BLK | BLJ | BNZ | BPC | BPE | BPD. Supplied in metal storage case. 2.5 Tdi PD
Engine Timing Tool Kit for BMW Mini One 2001-06(W10B16AA), Mini Cooper 2001-06 (W10B16BA) and Mini Cooper S 2002-06 (W11B16AA). Set includes Camshaft Sprocket Holding Tool (OEM 11 8 250), Engine Support Bracket (OEM 11 8 370) and Tensioner Assembly Tool (OEM 11 8 240).
This Engine Timing Tool Set is for VAG 2.7/3.0 Tdi and Tdi CR chain driven engines Can be used on diesel engines fitted to Touareg and Phaeton plus the 4.0 Tdi engine (ASE) in the Audi A8 (-10). Includes crankshaft and camshaft turning and holding tools Supplied in metal storage case Application
flat, hand, half round, round, square, three square files, half round rasp and round rasp. Supplied in tool roll. Display packed.
tool trays. Designed to fit the AP24 Topchest, Rollcab and Workstation range and a selection from our Superline PRO® range, these trays are available in over 30 different configurations.
Petrol engine timing tool set specifically designed for Fiat 1.2 & 1.4 8v engines in Fiat 500 | Idea | Linea | Punto | Doblo | Panda. Also Ford KA. Full application list and instructions supplied. Foam insert ensures the tools are replaced after timing belt replacement.
Specific kit supplied for Ford | Land Rover | PSA and Volvo 2.0 | 2.2 DOHC common rail diesel engines.
Hand held crankshaft holding tool with a specially designed head profile which permits access via a deep socket (not supplied) to each of the pulley bolts in turn OEM Ref 303-1310
For cleaning and repositioning of vehicle washer jets. Supplied with end caps to prevent personal injury when not in use. Display packed.
Expert Quality, nylon tool pouch, comprising 16 pouches of varying sizes, hammer loop, measuring tape clasp and chain. Supplied with 50mm wide adjustable webbing belt. Display carton.
Expert Quality, rigid nylon, reinforced with rivets. Comprises two large pouches, three smaller pouches, measuring tape clasp, hammer loop, four leather tool holders and nylon tool holder. Supplied with 50mm fully adjustable fast click webbing belt. Display carton.
10 pieces. 140mm long. Suitable for home or hobbyist use. Needle files ideal for precision work. Professional quality tool.
Collets supplied ... 6mm (1/4"), 8mm (5/16") Speed (no load) ... 10,000 - 30,000r/min Plunge stroke (no dust extraction) ... 0-50mm Plunge stroke (dust extraction) ... 0-38mm
Collets supplied ... 1/4", 1/2", 8mm Speed (no load) ... 11,500 - 22,000r/min Plunge stroke (no dust extraction) ... 0-50mm
For separating ball joints this tool uses the forked, leverage method.
5 cantilever trays. 420mm x 200mm x 210mm. Ideal storage solution for all types of tools. Sturdy metal. Red painted finish
A nine piece engine locking tool kit for the 5th generation VAG "blue motion" engine fitted with a common rail diesel system. Set includes Crankshaft Pulley Locking Tools for round (T10050)sprockets at 12oClock position and oval sprockets (T10100) at 1oClock position
RH drive rewind tool. Adaptor 1 = 22mm PCD, 6mm diameter pin. Adaptor 2 = 32.5mm PCD, 6mm diameter pins Reaction plate included. Adaptor No 1: Most popular Japanese and European vehicles. Adaptor No 2: Most Ford, Mazda, Mitsubishi, Toyota.
Simple tool for griping and rotating door handles Avoid damage to the fascia panel Specially designed
1/4" drive suitable for electric drills. Additional Information 1/4" Hex drive Hardened steel Double sided 3/8" cutting blade Spring loaded centre Length of Tool 73.24mm
Includes 6mm setting pin and washer. 6mm setting pin, 8mm setting screw, 9.5mm setting. Also includes TDC setting screw and setting bracket. Essential tool for setting and locking the camshaft. Suitable for Ford 1.6, 1.8 and 2.5 litre diesel engines.
xpert Quality, multi-purpose lever suitable for the manipulation of trim and fixings in the automotive, marine, aviation and bathroom environments. Manufactured from ultra tough high quality nylon. Display packed.
Timing tool for Bosch VE type fuel pumps and compatible pumps manufactured by Kikki and Nippon Denso Small diameter dial to allow easy access to obstructed pumps Dial Test Indicator 41 x 8mm Threaded sizes M8, M10, M1
Comprehensive engine timing tool set for Italian cars. Includes 24 tools for camshaft alignment, tensioning and crankshaft alignment to cover a wide range of petrol and diesel engines packed in a metal case.
Aids the removal and replacement of cam followers on 8 valve engine ble for Vauxhall/Opel. Requires 8 tools to complete the job. • Time saver. Essential tool for camshaft removal
A good starter engine timing tool kit for older diesel engines A selection of setting pins and locking screws OEM reference and application list included
Application: Audi TT Quattro Coupe and Volkswagen Golf 2008< Engine: VR6 3.2 litre, Code CBRA with standard pistons Equivalent to OEM T10147 Before first use of a new 6696 pass a well oiled piston and ring assemble
41mm diameter x 0-8mm x 0.01mm Precision tool For checking the TDC on diesel engines Also useful for checking run out on brake discs Mounts directly onto the TDC Indicator (4151) to give an accurate reading f
For use on brake systems that do not use anchor pins. Comfy grip handle.
This timing tool set is suitable for engines manufactured after 1997 where the threaded location holes have been removed.
A multi application wrench with variable adjustment. Holds the sprocket whilst releasing the fastener. Reduces potential damage to camshaft. Designed to allow the sprocket to be held still whilst undoing fixings. Adjustable.
Suitable for alternators. Plus water pumps. Also useful for rotating camshafts. Removes and locks any grooved 'V' type belt pulley. Can be used on tooth pulleys without damage.
To remove or replace drive shaft lock rings for CV joint servicing. This tool also spreads the ears of the wheel cylinder retaining clips on some vehicles
This camshaft locking tool is specifically designed for use on Vauxhall | Opel | Saab 1.4/1.6 16v Ecotec belt driven engines
Suitable for Fiesta, Puma, Escort, Focus, Courier, Mondeo, Tourneo, Transit, Transit Connect 1.8/2.0. Also suitable for Mazda 121.
Use with any 3/8"D rewind tool 10mm pins/29mm centres
To adjust the tension of the timing belt after the belt has been fitted Suitable for a range of vehicles - Hyundai/Proton/Mitsubishi/Volvo 2 piece OEM Ref C018 MD998767 999 5709 999-5709 09244-2800 OEM ref MD998767 999 5709, 09244-28000 Made in the United Kingdom Timing Tool for Belt Driven En
Part of the Laser range of engine timing tool kits and put together to provide the minimum tool requirement for setting the timing on the Fiat derived 1.3 JTD/HDi diesel engines that are found in the Fiat, Opel, Citroen, Peugeot, Ford, Suzuki Chrysler and Chevrolet ranges
A selection of timing pins for use on Citroen and Peugeot vehicles with petrol and diesel engines. Includes Crankshaft and camshaft timing pins plus tensioning tool
The kit includes a special wrench for controlled turning of the exhaust camshaft sprocket when removing and installing the VANOS unit. Also included is a primary timing chain pre-load tool for tensioning the timing chain on M50 M52 M42 and M60 engines
This tool is used during the installation of a new timing belt on models equipped with a manual tensioner.