You searched for sealey flywheel holding tool for
Please note that words 3 characters or less may be ignored by the search.
Covers most engines in the Ford range (pre 2007) including both petrol and diesel and the Zetec engine. Additional Information This tool is required on engines where the flywheel and crankshaft must be held at the correct timing position.
This flywheel locking tool is now available with 2 extra adaptors allowing use on a larger model group in the Ford range in both petrol and diesel engines. Flywheel locking tool – OEM 303-393. Adaptors – OEM 303-393-01/-02
This tool is specific to those Ford DuraTorq engines fitted with common rail fuel injection. OEM No 303-698 (21-251)
Includes: Flange Holding Wrench | 3 bolts 1/2"D OEM Ref: 1 871 000 200 303-1469 | KM 661-C. Timing Chain Tensioner lever + 2 bolts 1 870 900 400. Camshaft Locking Tool (2) 1 871 000 900 | 1 860 985 000, 303-1472 09917 68610, EN 46781, 0104-A Flywheel Alignment Pin & Spring 09912 38300, E
For holding the viscous coupling whilst working on the front of the engine - Ford Transit 2.3 petrol and 2.4/4.3 TDCi. working on the front of the engine. Applications: Transit 2000-2006 | Transit 2006 onwards | 2.3 Duratec petrol and 2.4 | 3.2 Duratorq TDCi.
Kit covers timing belt replacement and timing adjustment on Ford 1.6Ti-VCT petrol engines. Includes VCT setting plate, flywheel locking tool, camshaft and tensioner pins. Also includes camshaft setting plate for timing adjustment applications.
Counter holds the crankshaft pulley while the pulley retaining bolt is loosened/tightened. Also suitable for some Volvo vehicles.
A specialist locking and holding tool kit for the balance shafts fitted to the engines listed. Some engines require the removal and or checking of the balance shaft assembly for which these tools are required.
For use on the popular 1.3 JTD diesel engine found in the Citroen, Peugeot, Fiat, Ford and Alfa Romeo ranges.
Application: Ford focus 2005-2011, Galaxy 2006-2010, S Max 2006-2010 and Volvo Equivalent to Ford OEM 303-1183 and 303-1180 and Volvo 999 5765 Includes camshaft holding tool and crankshaft front oil seal installer
Flywheel locking and holding tool Mercedes Benz M651. Fits popular 1.8 & 2.1 diesel engines
Hand held crankshaft holding tool with a specially designed head profile which permits access via a deep socket (not supplied) to each of the pulley bolts in turn OEM Ref 303-1310
Includes a camshaft holding tool which is essential for holding the camshaft when checking the valve clearances, and a crankshaft front oil seal installe
Crankshaft pulley holding tool adapter 2 - OEM 2.000.018.400 303-1177 Crankshaft pulley hub holding tool 4 - OEM 2.000.001.000 Crankshaft pulley hub holding tool 3 - OEM 2.000.025.500 Crankshaft pulley holding tool 1 - OEM 1.871.000.2
NEW ENGINE TIMING KIT (FIAT, ALFA ROMEO, CITROEN, FORD, LANCIA, PEUGEOT, SUBARU, SUZUKI, VAUXHALL) (CC)
Timing chain tensioning tool - OEM 1 870 900 400 Crankshaft pulley holding tool - OEM 1 871 000 200 Crankshaft locking pin - OEM N/A 8mm Pin Crankshaft alignment tool - OEM 1 870 900 300 Camshaft alignment tool x 2 - OEM 1 871 000 900 Crankshaft pin - OEM EN-46785
For separating ball joints this tool uses the forked, leverage method.
RH drive rewind tool. Adaptor 1 = 22mm PCD, 6mm diameter pin. Adaptor 2 = 32.5mm PCD, 6mm diameter pins Reaction plate included. Adaptor No 1: Most popular Japanese and European vehicles. Adaptor No 2: Most Ford, Mazda, Mitsubishi, Toyota.
Includes 6mm setting pin and washer. 6mm setting pin, 8mm setting screw, 9.5mm setting. Also includes TDC setting screw and setting bracket. Essential tool for setting and locking the camshaft. Suitable for Ford 1.6, 1.8 and 2.5 litre diesel engines.
Aids the removal and replacement of cam followers on 8 valve engine ble for Vauxhall/Opel. Requires 8 tools to complete the job. • Time saver. Essential tool for camshaft removal
A multi application wrench with variable adjustment. Holds the sprocket whilst releasing the fastener. Reduces potential damage to camshaft. Designed to allow the sprocket to be held still whilst undoing fixings. Adjustable.
Part of the Laser range of engine timing tool kits and put together to provide the minimum tool requirement for setting the timing on the Fiat derived 1.3 JTD/HDi diesel engines that are found in the Fiat, Opel, Citroen, Peugeot, Ford, Suzuki Chrysler and Chevrolet ranges
From 1990 to 2006 the VAG 2.5 TDi and SDi diesel engines have appeared in the VAG commercial range This kit provides the essential setting and holding tools required for these engines when replacing the camshaft drive belt. Also suitable for Volvo S70, S80, V70 Mk II, 850 Suitable for use with th
Essential tools for setting and locking camshafts and crankshafts. For engines with single and double (twin) overhead camshafts. Covers Audi, Citroën, Ford, Honda, Land Rover, Mazda, MG, Peugeot, Rover and Vauxhall/Opel. OEM reference and application list included. Good starting kit for some of
xpert Quality, manufactured from chrome vanadium steel hardened and tempered with a polished finish. 43 tooth ratchet, 500mm long with forward/reverse selector. Handle with knurled grip. Spring-loaded ball bearing for secure socket holding. Sold loose.
This timing tool kit covers most engines in the Ford range (pre 2007) including both petrol and diesel and the Zetec engine. Supplied in foam tray with full OEM codes and application list included.
For cam replacements and head rebuilds on Volvo and Ford 2.5 ST engines. Contains all the tools to make cylinder head rebuild easier and faster Equivalent to Volvo OEM 999 5454, 999 5452, 999 5453, 999 5451 and Ford OEM 303-1178, 303-1182 Fitted to Volvo 850, S70, V70, XC70, V70. 960, S90, S60,
onal Information This radio removal tool kit is designed to help authorised audio specialists remove in-car sound systems. Suitable for: Audi | BMW | Ford | Mercedes-Benz | Volkswagen. Handy storage wallet. Time Saver.
This tool prevents movement when removing and installing the crankshaft pulley bolt. Hexagonal shaped tool matches with hole in crankshaft pulley. OEM Code 07JAB-0010200. Additional Information Prevents engine movement when removing and installing the crankshaft pulley bolt 50mm Hex
A very simple tool used to lock the flywheel via the ring gear to allow the front pulley to be undone without putting unwanted loads on the camshaft locking tools
For Corsa-C | Astra-G | Vectra | Zafira 1.4 | 1.6 16v engines OEM No. KM 652 Included in master kits 4866 and 3785
For use on Vauxhall Vectra B models (>2002). Always lubricate nut and bar before and after use. Two bars are included with this set. Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing (Laser Tools Recommends Molybdenum Disulphide Grease (black
Crankshaft pulley holding tool for BMW/Range Rover 4.4 petrol engines Additional Information Crankshaft pulley holding tool Application BMW (M60/M62) E31/E32/E34/E38/E39- OEM 11 2 450
Locks the Flywheel of the engines listed when removing or replacing the front pulley bolt Applications include Jaguar F-Type, XF, XFR/S, XJ, XJR, XK8, XKR and Land Rover Discovery 4, Discovery, Range Rover and Range Rover Sport Engine Codes: 5.0lt AJ-133, 508PS/508PN,
Timing tool Kit for Ford Duratorq engines including timing pump removal and installation tools for 2.0/2.4 TDCi.
A practical kit allowing the locking of the camshaft and crankshaft for replacement of the timing belt on the Ford range of 1.8 TDDi, TDCi and turbo diesel engines. Used on the Ford diesel engine where the diesel pump is driven by a separate chain drive.
Covers engines from 2006 onwards Crankshaft pulley (Vibration Damper) Holding tool
The extending handle in the closed position allows the tool to be used in confined spaces or if more leverage is required.
Timing Tool Set for VAG 2.0Litre TDi PD DOHC engines fitted to Audi A3/A4/A5/A6, Skoda Octavia II and Volkswagen Golf, Golf Plus, Jetta and Touran models. Also found on the Ford Galaxy
The Laser cam-belt tool range has been developed to provide the essential tools required to set and time the main engine components when replacing the camshaft belt drives.
This new camshaft setting bar updates the existing 3096 and is suitable for all the applications Also included in the kit is 303-748 (21-259) for Focus/C-Max 1.6, 1.4/1.6 and Fiesta/Fusion 1.2/1.4/1.6 Also used on Volvo models with 1.8/2.0 CHAIN engines
Engine Timing Tool Kit for BMW Mini One 2001-06(W10B16AA), Mini Cooper 2001-06 (W10B16BA) and Mini Cooper S 2002-06 (W11B16AA). Set includes Camshaft Sprocket Holding Tool (OEM 11 8 250), Engine Support Bracket (OEM 11 8 370) and Tensioner Assembly Tool (OEM 11 8 240).
For use on Rover/MG fitted with PG1 gearbox
Rear suspension tool for trailing arm bushes. Ford Focus Mk 1 & II (98-07)(07<) | Kuga 2008< | C-Max MPV 2007 | Mazda 3 (Chassis BK) 2003<09 Saloon and Hatchback, 5 (Chassis CR, CW) MPV | 2005 Volvo V50 Estate 2004<2012, S40 Mk II Saloon 2003<2012.
A pair of locking pins designed specifically for the later Ford TDCi engine ranges
Flywheel locking tool for Rover 75