You searched for sealey+tools+s
Please note that words 3 characters or less may be ignored by the search.
5 cantilever trays. 420mm x 200mm x 210mm. Ideal storage solution for all types of tools. Sturdy metal. Red painted finish
A nine piece engine locking tool kit for the 5th generation VAG "blue motion" engine fitted with a common rail diesel system. Set includes Crankshaft Pulley Locking Tools for round (T10050)sprockets at 12oClock position and oval sprockets (T10100) at 1oClock position
Aids the removal and replacement of cam followers on 8 valve engine ble for Vauxhall/Opel. Requires 8 tools to complete the job. • Time saver. Essential tool for camshaft removal
Flip socket head. 6mm x 7mm. Flexible shaft for easy access. Two tools in one. Spare heads available - Part No 2932.
A set of timing tools for the V6 belt driven engine on 2.5/2.6/3.0 engines with raised edge on the tensioner pulley. Fitted to Vauxhall/Opel Vectra-B, Omega-B, Sintra, Calibra with engine codes X25XE, X30XE, Y26SE, Y32SE. Saab 9-5 3.0 V6 with engine code B308E (1998-2003)
From 1990 to 2006 the VAG 2.5 TDi and SDi diesel engines have appeared in the VAG commercial range This kit provides the essential setting and holding tools required for these engines when replacing the camshaft drive belt. Also suitable for Volvo S70, S80, V70 Mk II, 850 Suitable for use with th
Essential tools for setting and locking camshafts and crankshafts. For engines with single and double (twin) overhead camshafts. Covers Audi, Citroën, Ford, Honda, Land Rover, Mazda, MG, Peugeot, Rover and Vauxhall/Opel. OEM reference and application list included. Good starting kit for some of
This comprehensive set of tools enables the correct engine timing to be made when replacing the timing belt. Suitable for use on the most recent engines with either HPi (petrol) or HDi (diesel) engines. Full application list and OEM codes are included.
This set enables the correct timing to be made when servicing the BMW M47 2.0 16 engines
Timing tool set for Renault 16v engines. Includes camshaft setting tool, tensioning tool for auxiliary drive belt and crankshaft TDC timing pin for: Laguna | Safrane 2.0 | 2.5 16v 1996-2001 engines.
Specifically designed to allow the correct alignment on the engine pulleys when replacing the cambelts on the 1.6 16v petrol engine. For 1.6 16v engines.
post in 1 hour This set of tools enables the correct timing to be made when servicing the Vauxhall/Opel chain engines fitted to Vauxhall Agila and Corsa with 1.0 12v X10XE and 1.2 16v X12XE engines.
Vauxhall/Opel Ecotec 2.0 engines fitted to Vectra-B, Sintra, Zafira, Frontera-B models. Also suitable for use on Saab 9-3/9-5 with 2.2D Turbo. OEM Code No: Saab 83 95 394/337/352/386. Metal case available - Part No 4536
Cette gamme de kit de calage de Laser Tools a été développée pour fournir uniquement les composants nécessaires pour caler le moteur lors du changement de courroie. Parce que ces kits ne sont fait que pour bloquer ces composants, l’utilisateur pourra cons Ce kit contient les outils essentiels pou
Engine locking tools with specifically machined profiles for locking the camshaft in the exact timing position.
Camshaft locking tools for Fiat Stilo 2.4 20v. OEM Ref. 1 870 828 000.
A very simple tool used to lock the flywheel via the ring gear to allow the front pulley to be undone without putting unwanted loads on the camshaft locking tools
This set of timing tools enables the correct timing position to be held when servicing GM Ecotec 2.2/2.5 litre engines. Also for use on some Renault engines. For Interstar 2.2 and 2.5 dCi. Engine codes: G9U, G9T (2002-2010).
These timing tools have been introduced specifically for the 2.5 TDi (99-08) engines fitted to Audi: A4 | A6 | A8 | Allroad and Volkswagen: Passat | S4 Turbo | S6 V8 | Sharan TDi. OEM Codes: 3242 | 3458 | 3369.
For use on Vauxhall Vectra B models (>2002). Always lubricate nut and bar before and after use. Two bars are included with this set. Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing (Laser Tools Recommends Molybdenum Disulphide Grease (black
For use on Mercedes-Benz chain engines which codes start with 112 or 113 Includes right and left handed camshaft locking tools
Three engine timing tools for Volkswagen and Audi TDI PD engines. Includes tensioner locking tool, crankshaft setting tool and injection pump locking for Volkswagen Passat 1.9 and Audi A4/A6 1.9 engines. Includes Injection pump locking pin (OEM 3359/T20102), tensioner
This kit provides the required timing tools to lock the camshafts and crankshaft in their timed positions Additional Information Designed specifically for use on the post 2010 V8 5.0lt petrol engines used across the Jaguar and Land Rover range
The 4083 provides the camshaft locking tools required for the 1200cc 6 and 12 valve engines used in Seat, Skoda and Volkswagen from 2002 to 2015.
Comprehensive range of alternator tools. Complete with blow mould case for storage. Set includes M10 Spline x 1/2"D, T50 Star x 1/2"D for Bosch alternators. Also Hex: 10mm | 8mm, Spline: M8 | M10 and Star: T40 | T50. Also included 1/2"D to Hex adaptor, 2 x pu
A range of timing tools for the latest EW coded PSA engine used on Citroën Xsara | Picasso | C5 | C4 | Evasion | Synergie | C8 | Jumpy | Dispatch and Peugeot 206 | 307 | 406 | Coupe 607 | 806 | 807 | Expert Engine Codes EW12J4(3FC) | EW10D-HPI(RLZ) | EW10J4S(RFK) | EW10J4(RFN/RFR) | EW7J4(6FZ).
Front crank seal fitting tools for VAG 1.8/2.0 TFSi petrol chain driven engines
With access tight in the engine bay VAG have designed the front end of certain vehicles to slide forward giving more room for cam belt and engine servicing, These tools are used through the front panel allowing the front end to be slid forward and held in the service position
Setting and locking set for BMW Vanos engines. Includes set-up bracket to time camshafts, 2 chain tensioner locking pins, secondary sprocket, Vanos checking and primary chain pre-tension tools. Applications: BMW 528i, X5, E46, Z3, Z4, 325, 525 with M52, M54 and M56 engines
A pair of cam belt tensioner tools specifically designed for the VAG 1.4 | 1.9 | 2.0 Tdi PD engines.
This Engine Timing Tool Set is for VAG 2.7/3.0 Tdi and Tdi CR chain driven engines Can be used on diesel engines fitted to Touareg and Phaeton plus the 4.0 Tdi engine (ASE) in the Audi A8 (-10). Includes crankshaft and camshaft turning and holding tools Supplied in metal storage case Application
This robust Slide Hammer with 5/8" UNF thread and 10lb of force can be used with a variety of tools and for many applications including the removal of stubborn diesel injectors etc. Useful with Laser's Diesel Injector Set (Part No 4760).
The most up to date, comprehensive timing tool kit for the latest Volkswagen Audi Group engines. Set includes Crankshaft Pulley Locking Tools for round (T10050)sprockets at 12oClock position and oval sprockets (T10100) at 1oClock position
To keep air tools lubricated. 1/4" BSP thread. Can be used with most of the air tools shown in this Catalogue. Display packed.
TOOL BOX KIT(Draper Tools reseves the right to substitute items in this kit of equivalent finish or quality if the original item has been discontinued or is out of stock)
Invaluable when installing exhaust systems. Two T-handled tools allow easy fitting of exhaust mounts. 90° and 120° hooks to suit block and ring mounts respectively.
One of a comprehensive range of Premier Hand Tools, suitable for daily professional use. Chrome Vanadium steel Total Drive® sockets, hardened and heat treated for strength with a fully polished mirror finish for resistance to corrosion.
Flip-up safety guards are supplied with all Sealey pillar drills. These guards are ideal for replacing broken or damaged units, but will also fit most other popular drills. Check the collar size of the drill and order accordingly.
Suitable for setting and adjusting the timing on N42 and N46 engines with the Valvetronic system. Also includes tools to align the twin Vanos unit.
Petrol engine timing tool set specifically designed for Fiat 1.2 & 1.4 8v engines in Fiat 500 | Idea | Linea | Punto | Doblo | Panda. Also Ford KA. Full application list and instructions supplied. Foam insert ensures the tools are replaced after timing belt replacement.
Part of the large range of Bush tools from Laser Tools •Rear lower control arm bush remover/installer •Applications BMW E87/E90/E93/M3 •Trailing arm Bush No 26643 •Supplied in a blow mould case with instructions and application list •Always grease the threaded bar before use - Bar is consumable
10 point.....17pt....and 21 point spline bit set
discontinue now --------- see la3096 in stock
Engine Timing Tool Ki t- Fiat /Alfa Romeo/Lancia with 1.2/1.4 engines Upgraded replacement kit for Laser 3788 Engine sizes 1.2 and 1.4 Additional pulley holding tools may be required for 1.2 engines
A specialist locking and holding tool kit for the balance shafts fitted to the engines listed. Some engines require the removal and or checking of the balance shaft assembly for which these tools are required.
Applications: Mercedes Benz M651 Chain driven 1.8/2.1 diesel engines (Cam tools for pre- 2012 vehicles) Including: Mercedes Benz C Class, E Class, GLK,M Class, SCLASS, Sprinter, Viano and Vito
1 x 1/2"D ratchet head 10 x Open ended spanner heads: 13 | 14 | 15 | 17 | 19 | 22 | 24 | 27 | 30 | 32mm Part of the Laser Tools Torque Wrench range
Part of the Laser range of specialist tools for Fuel Filters
Part of the Laser Tools Motorcycle range
A set of low profile, offset tools in Star, Hex, Flat and PzDrive profiles. Ideal for restricted access
A quality leather sports bag with the Laser Tools Racing logo. Strong comfortable brown handles
A comprehensive set of tools for most 24v and 12v automotive electrical repairs. Set includes: 220mm crimping tool, 2 x insulated screwdrivers: Flat 4mm x 100mm, Phillips Ph1 x 100mm, 120-250v tester, 130mm wire cutter, fuse puller. CRIMPING OF WIRES IS ONLY APPROPRIATE FOR 12V DC WIRES. DO NOT USE