You searched for UK Draper Tools Sealey Tools Laser Gunson Kamasa hand tools power tools air tools timing tools motorcycle tools body shop compressors electric power brake tools locking tools engineering tools garage
Please note that words 3 characters or less may be ignored by the search.
Part of the Laser range of Motorcycle tools
Engine locking tools with specifically machined profiles for locking the camshaft in the exact timing position.
For use on Mercedes-Benz chain engines which codes start with 112 or 113 Includes right and left handed camshaft locking tools
Three engine timing tools for Volkswagen and Audi TDI PD engines. Includes tensioner locking tool, crankshaft setting tool and injection pump locking for Volkswagen Passat 1.9 and Audi A4/A6 1.9 engines. Includes Injection pump locking pin (OEM 3359/T20102), tensioner
Suitable for setting and adjusting the timing on N42 and N46 engines with the Valvetronic system. Also includes tools to align the twin Vanos unit.
The latest addition to Laser Toolsâ€™ ever growing range of motorcycle tools and equipment is this easy to use fork tube puller (part no: 5469), designed for classic Triumph, BSA and Norton models
Engine Timing Tool Ki t- Fiat /Alfa Romeo/Lancia with 1.2/1.4 engines Upgraded replacement kit for Laser 3788 Engine sizes 1.2 and 1.4 Additional pulley holding tools may be required for 1.2 engines
Part of the Laser Tools Motorcycle range
A quality leather sports bag with the Laser Tools Racing logo. Strong comfortable brown handles
Part of the Laser Tools range of Timing Tools for Ford engines
A set of timing tools for the V6 belt driven engine on 2.5/2.6/3.0 engines with raised edge on the tensioner pulley. Fitted to Vauxhall/Opel Vectra-B, Omega-B, Sintra, Calibra with engine codes X25XE, X30XE, Y26SE, Y32SE. Saab 9-5 3.0 V6 with engine code B308E (1998-2003)
This set enables the correct timing to be made when servicing the BMW M47 2.0 16 engines
post in 1 hour
Camshaft locking tools for Lancia Kappa 2.0 | 2.4 20v.
A very simple tool used to lock the flywheel via the ring gear to allow the front pulley to be undone without putting unwanted loads on the camshaft locking tools
This set of timing tools enables the correct timing position to be held when servicing GM Ecotec 2.2/2.5 litre engines. Also for use on some Renault engines. For Interstar 2.2 and 2.5 dCi. Engine codes: G9U, G9T (2002-2010).
Part of the Hybrid range of hand tools
This tool kit is a complete kit that allows the valve timing to be set/maintained during cam belt replacement
A range of timing tools for the latest EW coded PSA engine used on Citroën Xsara | Picasso | C5 | C4 | Evasion | Synergie | C8 | Jumpy | Dispatch and Peugeot 206 | 307 | 406 | Coupe 607 | 806 | 807 | Expert Engine Codes EW12J4(3FC) | EW10D-HPI(RLZ) | EW10J4S(RFK) | EW10J4(RFN/RFR) | EW7J4(6FZ).
Our ProductsEngine Timing ToolsFiat Timing Tools Engine Service Tool - 1.3 JTD/CDTi/TDCi/DT/DTE5
This robust Slide Hammer with 5/8" UNF thread and 10lb of force can be used with a variety of tools and for many applications including the removal of stubborn diesel injectors etc. Useful with Laser's Diesel Injector Set (Part No 4760).
The General Motors master kit has been compiled to offer the timing tools required for both petrol and diesel engines found in the GM range. Includes coverage of the latest Eco-tec engines (Z16/Z18 codes)
TOOL BOX KIT(Draper Tools reseves the right to substitute items in this kit of equivalent finish or quality if the original item has been discontinued or is out of stock)
Invaluable when installing exhaust systems. Two T-handled tools allow easy fitting of exhaust mounts. 90° and 120° hooks to suit block and ring mounts respectively.
Part of the large range of Bush tools from Laser Tools •Rear lower control arm bush remover/installer •Applications BMW E87/E90/E93/M3 •Trailing arm Bush No 26643 •Supplied in a blow mould case with instructions and application list •Always grease the threaded bar before use - Bar is consumable
Laser Tools | 5137 | Hex Bit Set 7mm - 2pc Laser Tools | 5137 | He
Tools for Timing Chains on Mercedes Benz engines
Applications: Mercedes Benz M651 Chain driven 1.8/2.1 diesel engines (Cam tools for pre- 2012 vehicles) Including: Mercedes Benz C Class, E Class, GLK,M Class, SCLASS, Sprinter, Viano and Vito
Part of the Laser Tools Torque Wrench range
Part of the Laser range of specialist tools for Fuel Filters
Part of the Laser Tools Trim Clip removal range
A comprehensive set of tools for most 24v and 12v automotive electrical repairs. Set includes: 220mm crimping tool, 2 x insulated screwdrivers: Flat 4mm x 100mm, Phillips Ph1 x 100mm, 120-250v tester, 130mm wire cutter, fuse puller. CRIMPING OF WIRES IS ONLY APPROPRIATE FOR 12V DC WIRES. DO NOT USE
Part of Laser's range of tools for the Hybrid vehicle ranges
Part of the Laser range of tools for Oil Sump Repair
Part of the Laser Tools workshop range
Part of the Hybrid range of hand tools
Part of the Laser range of tools for Steering and Suspension After separating the ball joint from the steering knuckle slip the tool over the track rod and remov
Aids the removal and replacement of cam followers on 8 valve engine ble for Vauxhall/Opel. Requires 8 tools to complete the job. • Time saver. Essential tool for camshaft removal
10 point.....17pt....and 21 point spline bit set
A set of low profile, offset tools in Star, Hex, Flat and PzDrive profiles. Ideal for restricted access
Lifting capacity 50kg. Double handle creates suction. Can also be used as a glass positioner. Powerful grip vacuum