You searched for 16pcs spark plug thread repair tool set
Please note that words 3 characters or less may be ignored by the search.
M6 threaded insert fitting kit for Mercedes Benz Injector clamping bolt Application Mercedes Benz CDi engines Contents: M8x1.0mm Tap, 7-8mm step drill, 6mm drill, Drill guide, insert fitting tool & 5x threaded inserts Time saver – the task can be performed with minimal dismantling and the cam
Powertrain Engine / Petrol/Spark Spark Plug Socket - 21mm Single Hex
Standard spark plug socket for modern vehicles 21mm 1/2"D
T-bar for greater leverage. Universal joint function for improved access. 16mm Hex also available (Part No 0246)
Ten blade feeler gauge for automotive use. Suitable for use on ignition points, spark plug gaps and tappets. Sizes: 0.0015 | 0.002 | 0.003 | 0.004 | 0.006 | 0.008 | 0.810 | 0.012 | 0.015 | 0.025.
Includes 6mm setting pin and washer. 6mm setting pin, 8mm setting screw, 9.5mm setting. Also includes TDC setting screw and setting bracket. Essential tool for setting and locking the camshaft. Suitable for Ford 1.6, 1.8 and 2.5 litre diesel engines.
Timing tool for Bosch VE type fuel pumps and compatible pumps manufactured by Kikki and Nippon Denso Small diameter dial to allow easy access to obstructed pumps Dial Test Indicator 41 x 8mm Threaded sizes M8, M10, M1
A good starter engine timing tool kit for older diesel engines A selection of setting pins and locking screws OEM reference and application list included
This timing tool set is suitable for engines manufactured after 1997 where the threaded location holes have been removed.
Suitable for Fiesta, Puma, Escort, Focus, Courier, Mondeo, Tourneo, Transit, Transit Connect 1.8/2.0. Also suitable for Mazda 121.
Part of the Laser range of engine timing tool kits and put together to provide the minimum tool requirement for setting the timing on the Fiat derived 1.3 JTD/HDi diesel engines that are found in the Fiat, Opel, Citroen, Peugeot, Ford, Suzuki Chrysler and Chevrolet ranges
A small but essential kit for setting the camshafts and tensioner on the popular 1.4 and 1.6 FSi petrol engines found across the VAG ranges from 1999 to 2008 these engines Use one belt to transfer the drive across the camshafts depending on the engine specification the cam setting pins may be use
From 1990 to 2006 the VAG 2.5 TDi and SDi diesel engines have appeared in the VAG commercial range This kit provides the essential setting and holding tools required for these engines when replacing the camshaft drive belt. Also suitable for Volvo S70, S80, V70 Mk II, 850 Suitable for use with th
For Italian cars For deep seated spark plug holes (14mm) Alfa Romeo, Fiat and Lancia OEM Code 1 860 895 000/1 895 879 000 Also used on Ferrari engines
Essential tools for setting and locking camshafts and crankshafts. For engines with single and double (twin) overhead camshafts. Covers Audi, Citroën, Ford, Honda, Land Rover, Mazda, MG, Peugeot, Rover and Vauxhall/Opel. OEM reference and application list included. Good starting kit for some of
Timing tool set for Renault 16v engines. Includes camshaft setting tool, tensioning tool for auxiliary drive belt and crankshaft TDC timing pin for: Laguna | Safrane 2.0 | 2.5 16v 1996-2001 engines.
Suitable for Alfa Romeo 145/146 1.8 & 2.0 Twin Spark (1996>) and 155/156/Spider/ GTV 2.0 16v (<1995).
For use on Vauxhall Vectra B models (>2002). Always lubricate nut and bar before and after use. Two bars are included with this set. Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing (Laser Tools Recommends Molybdenum Disulphide Grease (black
Three engine timing tools for Volkswagen and Audi TDI PD engines. Includes tensioner locking tool, crankshaft setting tool and injection pump locking for Volkswagen Passat 1.9 and Audi A4/A6 1.9 engines. Includes Injection pump locking pin (OEM 3359/T20102), tensioner
For left and right hand threaded pistons. Suitable for most 3/8"D wind-back adaptors and pin type adaptors.
Enables correct pre-tensioning to be applied to the timing belt 3 interchangeable spacers OEM code MOT 1543 / KM 6234
This new camshaft setting bar updates the existing 3096 and is suitable for all the applications Also included in the kit is 303-748 (21-259) for Focus/C-Max 1.6, 1.4/1.6 and Fiesta/Fusion 1.2/1.4/1.6 Also used on Volvo models with 1.8/2.0 CHAIN engines
Setting and locking set for BMW Vanos engines. Includes set-up bracket to time camshafts, 2 chain tensioner locking pins, secondary sprocket, Vanos checking and primary chain pre-tension tools. Applications: BMW 528i, X5, E46, Z3, Z4, 325, 525 with M52, M54 and M56 engines
This robust Slide Hammer with 5/8" UNF thread and 10lb of force can be used with a variety of tools and for many applications including the removal of stubborn diesel injectors etc. Useful with Laser's Diesel Injector Set (Part No 4760).
Calibrated in BAR and PSI (300psi Max) Suitable for petrol engines with 14/18mm spark plug Instructions included
Plated steel box end wrenches with swivel handle and zinc plated finish. Display packed