Draper Tools sells products in all major tool categories including automotive, DIY, gardening, construction, engineering and has more recently diversified into hobby, leisure and other non tool lines. Draper Tools has been awarded accolades for the high quality of its products from well known consumer magazines such as Auto Express, Car Mechanics and Practical Woodworking to name but a few!
Dia. x Bore 200 x 50mm Width 25mm
Contents: Camshaft locking tool - OEM T10016/T10074
Crankshaft turning tool - OEM T40049 Camshaft alignment pin - OEM T40060 Camshaft alignment tool - OEM T40061 Tension tool - OEM T40062 Pulley bolt - OEM T40058 Timing chain tensioner locking pins - OEM T40071 Injection pump timing pin - OEM 3359 Chain tension pins - OEM N/A Crankshaft locki
Camshaft alignment tool - OEM T10504 Stepped pin long - OEM T10504/1 Stepped pin short - OEM T10340 Crankshaft timing pin - OEM T10504/2
Crankshaft alignment tool - OEM 1.860.905.000, OEM 1.860.905.010, OEM 2.000.003.000, EN-46788 32 025 009 Flywheel locking tool - OEM 1.860.898.000, Fuel pump alignment pin - OEM 1.860.965.000 Camshaft alignment pins x 2 - OEM 1.870.896.900, EN-46789 32 025 008
Crankshaft pulley holding tool adapter 2 - OEM 2.000.018.400 303-1177 Crankshaft pulley hub holding tool 4 - OEM 2.000.001.000 Crankshaft pulley hub holding tool 3 - OEM 2.000.025.500 Crankshaft pulley holding tool 1 - OEM 1.871.000.2
Conforms to EN166 1 FT Specifications: 5-3.1FT Wrap-around safety glasses with smoked, scratch-resistant lenses
This product has been discontinued but we have stock available.*****
Expert Quality, extension wrench. Used in conjunction with Stock No. 17609
Contents: Crankshaft holding tool - OEM 999-7128
Expert Quality, multi-application sprocket holding wrench with variable adjustment. Allows the user to hold a variety of sprockets whilst undoing or tightening the retaining fixings. Kit contains 2 longer pins for further application adaptation.
M17 Spline Bit Socket 1/2"D (ahaCC) Product Code / MPN:
Sprocket holding tool - OEM E869-016 OEM Equivalents (1 860 831 000, 1 860 885 000, 1 842 128 000, 1 822 155 000, 1 822 146 000, MOT 799, 6016T, 3036, 5199, 9880, T10172, 999 5645, 999-5199, 999-5705, 15 30 A, UN205072, 0132 AA, 205 072, MP1 216, MB990767, U20002)
Vibration damper holding tool - OEM T10531/1 Crankshaft sprocket holding tool - OEM T10531/2 Crankshaft sprocket holding tool adapter - OEM T10531/3 Crankshaft sprocket holding tool nut - OEM T10531/4
Contents: Camshaft timing tool - OEM T10494 Crankshaft locking tool - OEM T10340
Camshaft locking tool - OEM T10414 DTI gauge - OEM VAS6079 TDC indicator - OEM T10170 Camshaft alignment tool - OEM T10171 Tensioner locking pin - OEM T20046/T40011 Crankshaft locking pin - OEM T10340 Guides - OEM T10341
1 Insulated torque screwdriver 1 Insulated Holder Driver 1 Precision Insulated Holder Driver 4 plain slot size: 3 x 60, 4.0 x 80, 5.5 x 80 and 6.5 x 100mm 3 cross slot sizes: No.0 x 60, No.1 x 80 and No.2 x 100mm 3 PZ TYPE sizes: No.0 x 60mm, No.1 x 80 and No.2 x 100mm 4 Dr
Warning: Not to be used in extreme weather conditions
Expert Quality, Tungsten Carbide Tipped (T.C.T) blades, hardened and tempered to ensure a long life. Display packed.
Power 12 Volt 120watt Max pressure 150PSI Battery type Li-ion Battery capacity 1500mAh Pressure accuracy -1/+1.5PSI Cable length 3.5m
Sizes: M12 | M14 | M16 | M18 x 45mm long and M12 | M14 | M16 | M18 x 78mm long in 1/2"D. Can be used on tamperproof and standard fittings. Tamperproof applications include VAG hubs | calipers | suspension and drain
Manufactured with three temperature settings (50°C, 50-450°C and 50-600°C), delivering a machine ideal for paint stripping, thawing pipes etc. Supplied with concentrator nozzle, hooked nozzle, edge protector.
Disc Brake Pad Puller Seized Brakes Pads Calipers Mini Slide Hammer Universal
Multi-pocket nylon bucket-shaped bag with reinforced carrying handles, five internal pockets and eight external pockets. Fits to all standard shaped 12L buckets. Drawstring closure for security. Packed in polythene bag with insert card.
3 x straight bits - 6, 12 and 16mm diameter. 90° ‘V’ grooving (or groove) bit dovetail bit 12.7mm diameter. 45° chamfer bit
For cleaning and repositioning of vehicle washer jets. Supplied with end caps to prevent personal injury when not in use. Display packed.
9 x Plain slot - 3, 4 (x 2), 5 (x 2), 6 (x 3) and 7mm 9 x Cross slot - No.0 (x 2), No.1 (x 2), No.2 (x 3) and No.3 (x 2) 9 x PZ type - PZ0 (x 2), PZ1 (x 2), PZ2 (x 3) and PZ3 (x 2) 7 x Draper TX-STAR® - T8, T10, T15, T20, T25, T30 and T40 6 x Hex - 2, 3, 4, 5, 5.5 and 6mm
13 fully insulated sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm fully insulated reversible ratchet with "quick release" button fully insulated extension bars size: 50, 75, 100, 150mm.
Cutter for cutting plastic and vinyl pipes (6 - 50mm O/D). There is a safety clip to keep handles closed when not in use. Cutter body is manufactured from diecast aluminium and fitted with a hardened and tempered replaceable steel blade. Display packed.
Manufactured from durable plastic. Angled corner scraper for push and pull scraping. Display packed.
bit holder 10mm x 1/2" sq. drive 6 Draper TX-STAR® bits: T20, T25, T30, T40, T45 and T50 x 30mm long 1 Draper TX-STAR® bit: T55 x 75mm long
xpert Quality, multi-purpose lever suitable for the manipulation of trim and fixings in the automotive, marine, aviation and bathroom environments. Manufactured from ultra tough high quality nylon. Display packed.
Draper vibration alarm - AL6 / 56365 Vibration alarm, for use within the home, tool cases, luggage or mobile items. Very cheap solution if you want security but are on a budget! New and unused and in their original packaging We have been going through our stock and have found some gems, hiding withi
Carbon steel hardened and tempered coated with titanium Nitride for longer life. For use with power and hand drills. Display packed in soft grip case
VEHICLE DOOR LOCKOUT TOOL KIT STOCK No. 55103. PART No. EDOK.
Voltage ... 230V - 50Hz Rated input … 600W Blade diameter … 89mm Bore diameter … 10mm Max. depth of cut at 90° … 0-28.5mm Speed (no load) … 5500r/min Weight … 2.3kg
Ideal for keeping possessions dry and safe on building sites or during outdoor activities. Water-resistant polyester/PVC with 'lock and roll' feature for a watertight closure. Supplied with adjustable shoulder strap. Display packed.
Handy 6V rechargeable torch with impact-resistant ABS housing and krypton bulb. The torch is water-resistant
11 x 12 point sockets size: 22, 24, 26, 27, 30, 32, 33, 36, 38, 41 and 46mm 10 x 12 point sockets size: 15/16, 1.1/8, 1.3/16, 1.1/4, 1.5/16, 1.3/8, 1.7/16, 1.1/2, 1.5/8 and 1.3/4" AF reversible ratchet (chrome vanadium steel) 3 extension bars size: 100, 150 and 200mm sliding &a
11 x 13, 13 x 15, 14 x 17 and 19 x 22mm
10 x 11, 12 x 13, 14 x 15, 16 x 17 and 18 x 19
Expert Quality, high speed steel twist drills. Display packed.
Expert Quality, high speed steel twist drills. Display packed.
Weatherproof single outdoor 230V socket with RCD adaptor and cable Ideal for powering of pressure washers, power tools, garden lights, pond pumps etc Comprises: 13A socket, RCD and 3M of cable with stripped ends ›
Fitted with a fully adjustable 50mm wide steel blade, that’s hardened, tempered and fully ground for delivering a professional finish to the work piece.
For the removal of swarf and burrs from machined components leaving a clean hole. The 10.5mm diameter countersink is ideal when a chamfered edge is required. The deburring blade is suitable for use in steel, aluminium and plastic. USED ON DR37023
For the removal of swarf and burrs from machined components leaving a clean hole. The 10.5mm diameter countersink is ideal when a chamfered edge is required. The deburring blade is suitable for use in steel, aluminium and plastic. Display packed. REPLACEMENT BLADE DR52071
for dr59319 pir alarm
Double-ended nail puller with crowfoot and chisel ends. Forged from good quality carbon steel hardened and tempered. Display packed.
Tungsten Carbide Tipped (T.C.T) blades, hardened and tempered to ensure a long life. Display packed.
Blade Length 65mm Socket Size 6mm 6mm Nut spinner manufactured with chrome vanadium steel blades that have been hardened and tempered for added strength