CRANKSHAFT PULLY HOLDING TOOL
Prevents engine movement when removing and installing the crankshaft pulley bolt. Centre hole allows access to crankshaft pulley bolt with deep socket. Suitable for: Rover 618 | 623 | 620 (93-99), Honda Aerodeck 2.2 (93-) | Accord 2.0 (97-) | Accord 2.2 Vtec | Accord 2.2 Coupe, Prelude 2.0 (97-) | C
This tool prevents movement when removing and installing the crankshaft pulley bolt. Hexagonal shaped tool matches with hole in crankshaft pulley. OEM Code 07JAB-0010200. Additional Information Prevents engine movement when removing and installing the crankshaft pulley bolt 50mm Hex
This tool is designed to remove and install the camshaft pulley on Subaru Impreza Single Hex x 60mm
This tool is designed to remove and install the camshaft pulley on Subaru Impreza 12pt
Required to allow the application of high torque for loosening and tightening the crank pulley fixings without disturbing the crank position. Long pins with cranked handle
This tool is designed to prevent the camshaft pulley from rotating when releasing the fixing bolt. A torque of 30Nm is recommended and using an angle gauge a further 45 degrees
For holding the viscous coupling whilst working on the front of the engine - Ford Transit 2.3 petrol and 2.4/4.3 TDCi. working on the front of the engine. Applications: Transit 2000-2006 | Transit 2006 onwards | 2.3 Duratec petrol and 2.4 | 3.2 Duratorq TDCi.
Part of the Laser range of Timing Tools - Jaguar/Land Rover Additional Information This tool provides the required components to hold the crankshaft vibration damper in place whilst undoing the very tight pulley mounting bolt.
Designed to be used to hold the crankshaft pulley stationary whilst loosening or tightening the crankshaft pulley fixing bolts. Designed with an angled shaft to assist access on transverse mounted engines
Crankshaft pulley holding tool for BMW/Range Rover 4.4 petrol engines Additional Information Crankshaft pulley holding tool Application BMW (M60/M62) E31/E32/E34/E38/E39- OEM 11 2 450