Allows effective transmission of impact force and vibration to any adaptor with a 5/8" thread
Recommended for use with the Laser Air Hammer Part No 6031
For diesel injector extraction use 6092 with: 4760 Delphi/Bosch CR kit , 5128 Bosch CR Dual Connection Adaptor, 6118 Siemens M25, 6119 Denso M20, 6120 Siemens M27, 6121 non CR M12 injectors, 6122 Delphi M14 and 6123 off-line adaptor.
Offers an effective means of extraction of stuck injectors using adaptors listed above
Made in Sheffield. Registered Design
On high-mileage diesel engines attempting to remove an injector is often a challenging task! This is caused by several factors including carbon blow-back, corrosion, electrolytic reaction between dissimilar metals, etc. Injectors can be seized so solidly that they are almost impossible to remove. Laser’s new air hammer extractor (part no 6092) uses the power of the air hammer to withdraw and extract seized and stuck components such as diesel injectors, pivot pins and small diameter bearings.
For removing diesel injectors, a full range of adaptors is available to suit most injectors fitted to modern cars. Once the extractor is screwed on to the injector, and the air hammer connected, the powerful impact and vibration will help extract the most stubborn components. The Laser Tools air hammer (part no 6031) is the ideal partner for the new extractor.
This is a registered design and manufactured by Laser Tools in their Sheffield manufacturing plant — another valuable tool for the professional technician.
For further details, please contact the Marketing Department: 01926 818196